NANO PRO 4-Jar 8L Omnidirectional Planetary Ball Mill
NANOSSR offers omnidirectional planetary ball mill used for high-tech micro computer chip control. It can run alternately for positive turn and reverse turn(0-999min), and run alternately for positive turn and pause, reverse and pause, and then positive run. The omnidirectional ball milling also alleviates sample-wall sticking, which reduced maintenance cost as well as downtime. It is especially suitable for cooling or intermittent operation.
Technical Specification
|
Model |
NANO PRO 4-Jar 8L Omnidirectional Planetary Ball Mill |
|
Jar and Total Volume |
2L*4=8L（Vacuum jar selection：1L-2L） |
|
General grinding jar material |
Metal material selection：304 stainless steel、Tungsten carbide（YG8) |
|
Nonmetal material selection: ceramic / corundum / alumina, zirconia, agate |
|
|
high polymer material selection: Nylon, polyurethane, polytetrafluoroethylene (PTFE) |
|
|
General grinding ball material |
Stainless steel, ceramic, corundum, alumina, zirconia, agate, tungsten carbide |
|
Maximum loading per jar |
Raw material and grinding ball less than 1/3 of grinding jar |
|
Feeding granularity |
Friable material less than 10mm, others less than 3mm |
|
Discharging granularity |
minimum up to 0.1μm |
|
Grinding Method |
Dry grinding / wet grinding / high energy alloying grinding / vacuum grinding(need customized) / low temperature grinding(need customized） |
|
Speed (adjustable) |
Max revolution0-320r/min; Rotation:0-640r/min Planetary total speed:2560r/min |
|
360 degree speed(adjustable) |
1-14r/min |
|
Speed ratio（revolution:rotation） |
1:2 |
| Adjusting speed control method |
PLC Frequency conversion control system, Touch screen control system |
|
Driving style |
Gear drive |
|
Grinding ball |
General grinding over 800 mesh(5mm;10mm;15mm) feeding material less than 3mm |
|
Fine grinding 800-1500 mesh (3mm;5mm;10mm;)feeding material less than 1mm |
|
|
Super fine grinding over 1500 mesh(0.1~10μm)(1mm;3mm;5mm) feeding material less than 200 mesh |
|
|
Voltage |
110V |
|
Power |
1.5Kw |
|
Working method |
Two or four cans working at the same time |
|
Maximum continueworking time |
72h（Timing 0-9999h） |
|
Programmed control |
The ball grinding used for high-tech micro computer chip control. It can run alternately for positive turn and reverse turn(0-999min), and run alternately for positive turn and pause, reverse and pause, and than positive run. It is especially suitable for cooling or intermittent operation. |
|
Weight |
290kg |
|
Dimension |
106*96*106 |
Our wide range of premium quality milling jars and milling media balls have excellent wear resistance and milling efficiency for powder milling, for customization please contact us.
